[ANSS-netops] Configuration for Kinemetrics Basalt - S-13s

[Croker, David]

Hi John,

In the NCSN we do not use S-13's but rather L-4C seismometers from Sercel.
In the few installations where we have been installing Basalts with L-4C's
attached we have used the 2.5V full-scale value for that channel.  So far
that seems to work just fine.  However, I see that the S-13 has just over
twice the output (~630 V/m/s) as an L-4C (~275 V/m/s), so you may want to
try the 5V setting on the Basalt.

If you want more general help setting up the Basalt, ask Jacob.  ;-)

Dave

On Mon, Jun 10, 2013 at 12:16 PM, Jacob Crummey <jcrummey at gps.caltech.edu>wrote:

>  Hi John,
>
> Are you looking for the configuration of the Basalt specific to the S-13
> sensors?  Or are you asking for help in setting up a Basalt in general?
>
> I can help you with setting up a Basalt, but we don't use the S-13 sensors
> in our network.
>
> -Jacob
>
>
> On 06/10/2013 12:11 PM, John H Parker (jhparkr1) wrote:
>
>  Net-Ops mailing list:****
>
> ** **
>
> We are going to be setting up two new stations using Kinemetrics Basalt
> DASs with S-13 sensors. We have never done this before, and wondered if
> anybody out there had done this and how you had configured it. ****
>
> ** **
>
> Thanks so much for your help,****
>
> John****
>
> ** **
>
> John H. Parker****
>
> Research Associate/Technician****
>
> The University of Memphis****
>
> Center for Earthquake Research and Information (CERI)****
>
> jhparkr1 at memphis.edu****
>
> (336) 228-7230****
>
> (901) 258-5115 (Mobile)****
>
> ** **
>
> The University of Memphis, a Tennessee Board of Regents institution, is an
> Equal Opportunity/Affirmative Action University. It is committed to
> education of a non-racially identifiable student body.****
>
> ** **
>
>
> _______________________________________________
> ANSS-netops mailing listANSS-netops at geohazards.usgs.govhttps://geohazards.usgs.gov/mailman/listinfo/anss-netops
>
>
>
> _______________________________________________
> ANSS-netops mailing list
> ANSS-netops at geohazards.usgs.gov
> https://geohazards.usgs.gov/mailman/listinfo/anss-netops
>
>


-- 
USGS - Earthquake Science Center - NCSN Field Operations Manager
David S. Croker                                                  office
(650) 329-4697
345 Middlefield Rd, MS 977                                    fax (650)
329-4732
Menlo Park, CA 94025                                          cell (650)
465-4334
email: croker at usgs.gov
Quake info: http://earthquake.usgs.gov/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://geohazards.usgs.gov/pipermail/anss-netops/attachments/20130611/8f6e9f1e/attachment-0001.html>