[Geomag-operations] [EXTERNAL] Please check BRW

[Sauter, Edward]

Bryan,
That's GREAT!  Now, we just need to figure out why the F data isn't being
logged.

I would think , Abe should be contacting you.  Way over my pay grade!!

Ed

On Tue, Aug 7, 2018 at 12:55 PM, Bryan Thomas - NOAA Federal <
bryan.thomas at noaa.gov> wrote:

> I think we are getting somewhere.  I am able to SSH to 192.148.94.162 from
> the Display laptop in the Office building.  Please check that data is
> flowing.  I am not able to see the WebDisplay website for some reason.
>
> Here's what I did:
>
> Using a 12v wall wart that had been modified with the nice black and red
> connectors, I set up KVM in my office and I looked at the BOU MXE. I
> noticed that when I plugged in an Ethernet cable the IP address seemed to
> move around.  eth0 might not always be the interface closest to the CF card
> reader? uname -a seems different among MXE as well. I didn't dig deeper.
>
> I copied the iptables setup to the MXE that had first been sent to me,
> using iptables-save and iptables-restore and a USB drive.  I added rules in
> the filter table accept chain for our office computers to SSH and to see
> the WebDisplay, which we had been approved to do before.  I was able to ssh
> at my desk.  I wasn't able to stare-and-compare directly as I would have
> liked, because I only had one power connector for the MXE.
>
> I took the MXE to the Combo building and plugged it all in.  I used the
> RS-232 cable that came from BOU, because I didn't want to spend the time to
> re-assemble the BRW backshell.  The MXE that is currently in place is the
> one originally sent when the replacement Overhauser did not give F after
> the first one died.
>
> The Overhauser did come up and start counting seconds, but the nT value
> stayed at zero.  I swapped in the box that we had here previously (the one
> we were sent at first, not the one from BOU).
>
> I went back to the Office building. I see magworm scrolling and I am able
> to SSH to 192.148.94.162. I am not able to get WebDisplay to load. There is
> an Apache Tomcat error that was happening before.
>
> I have attached pictures of what is in-situ currently, just in case my
> notes and recollection are muddy.
>
> Let me know if this is working so I can get the other gear back to you.
>
> Regards,
> Bryan
>
> Bryan D. Thomas
> Station Chief, Barrow Observatory
> Global Monitoring Division
> NOAA Earth System Research Laboratory
> PO Box 888 Barrow AK, 99723-0888
>
> Observatory: 907.852.6500
> Mobile: 907.367.3611
> Fax: 907.852.4622
>
> http://www.esrl.noaa.gov/gmd/staff/bryan.thomas/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://geohazards.usgs.gov/pipermail/geomag-operations/attachments/20180807/9ce34bb4/attachment-0001.html>