[ANSS-netops] Earthworm Guide Channel Triangle Wave Generator
Gray Jensen
gjensen at usgs.gov
Sat Oct 30 18:30:05 UTC 2010
The Earthworm triangle channel will work with any function generator that can produce a reasonably linear triangle wave signal that is close to +/- 2.0 volts (4vp-p) and 2.0 hz. Attached is a PDF of a simple circuit circuit that will do the trick. I can provide Gerber files, etc. for a PCB for this circuit if you email me at the address below.
Gray Jensen
USGS (retired)
gjensen at usgs.gov
----- Original Message -----
From: David C Wilson
To: anss-netops at geohazards.usgs.gov
Sent: Friday, October 15, 2010 12:47 PM
Subject: [ANSS-netops] Earthworm Guide Channel Triangle Wave Generator
Hello,
I am sending a note here on behalf of HVO, they are experiencing problems
with their Earthworm Guide Channel Triangle Wave Generator. It seems to
be producing spikes that are causing DAQ restarts and subsequent data gaps.
Does anyone have a spare Triangle Wave Generator or at least the schematics
so that they can build a new one?
Thanks,
Dave
David Wilson
US Geological Survey
Albuquerque Seismological Laboratory
P.O. Box 82010
Albuquerque NM 87198-2010
------------------------------------------------------------------------------
_______________________________________________
ANSS-netops mailing list
ANSS-netops at geohazards.usgs.gov
https://geohazards.usgs.gov/mailman/listinfo/anss-netops
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://geohazards.usgs.gov/pipermail/anss-netops/attachments/20101030/186846e4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Tri3.pdf
Type: application/pdf
Size: 46257 bytes
Desc: not available
URL: <http://geohazards.usgs.gov/pipermail/anss-netops/attachments/20101030/186846e4/attachment-0001.pdf>
More information about the ANSS-netops
mailing list