[ANSS-netops] Timing: IRIG-B conversion to NMEA

[Meremonte, Mark]

Hi All,

Have a K2-Altus where difficult to install GPS coax cable to a skyview
location.   However, nearby is a network connection where IRIG-B is
available over the Ethernet.  Anyone have knowledge of an IP device that
could grab the IRIG-B signal, convert it to a standard RF GPS NMEA signal
to input over coax to K2 in this instance?

Or, I wonder if a logger that supported IP and NTP was installed, could
that IRIG-B be converted into a NTP signal for logger to utilize?

3rd option I entertained is use of an Fiber Optic Network System which has
a pair of devices which provides a standard RF GPS NMEA coax signal to
device.  (very expensive system though).

Regards,
mark

-- 
*********************************************************
Mark Meremonte         Geophysicist
U.S. Bureau of Reclamation:  Seismology, Geomorphology, and Geophysics Group
Denver Federal Center            Work: 303-445-3298  Cell: 303-808-3894
POBox 25007, 85-833000      Email: mmeremonte at usbr.gov
Denver, CO  80225                  Web: http://www.usbr.gov
Ship:  U.S. Bureau of Reclamation, DFC, Bldg. 67-10th Floor, Denver, CO
80225
**********************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://geohazards.usgs.gov/pipermail/anss-netops/attachments/20160302/cd2c9278/attachment.html>