[ANSS-netops] pdcc and basalt/s13

[Juan B Lugo Toro]

Hi Mitch

Thanks for your information.

Regards
Juan



On Fri, Oct 4, 2013 at 6:55 PM, <mwithers at memphis.edu> wrote:

>
> A problem crept into the NRL in July and Mary fixed it today.  So if you
> used the NRL to create a new station with a rock das between July and
> today,
> you might want to check your dataless.
>
>
> Mitch
>
> Center for Earthquake Research and Information (CERI)
> University of Memphis                Ph: 901-678-4940
> Memphis, TN 38152                   Fax: 901-678-4734
>
>
> On Thu, 3 Oct 2013, mwithers at memphis.edu wrote:
>
>
>> Any unfurloughed people using a basalt connected to a shortperiod sensor?
>> I have a basalt connect to an S-13 and am attempting to use the "select
>> instrumentation" tool in pdcc to generate dataless.  But pdcc keeps
>> complaining
>> about a sensitivity of 0.
>>
>> I'm using using an S-13 with 629 V/m/s, and have the basalt max counts of
>> 8388608, max 20V, acausal fitler and preamp of 1.  That should yield a
>> sensitivity around 263 Volts/micron/second not 0.
>>
>> Has anyone else run into this?
>>
>> Mitch
>>
>> Center for Earthquake Research and Information (CERI)
>> University of Memphis                Ph: 901-678-4940
>> Memphis, TN 38152                   Fax: 901-678-4734
>>
>>
>> ______________________________**_________________
>> ANSS-netops mailing list
>> ANSS-netops at geohazards.usgs.**gov <ANSS-netops at geohazards.usgs.gov>
>> https://geohazards.usgs.gov/**mailman/listinfo/anss-netops<https://geohazards.usgs.gov/mailman/listinfo/anss-netops>
>>
>>
>>
> ______________________________**_________________
> ANSS-netops mailing list
> ANSS-netops at geohazards.usgs.**gov <ANSS-netops at geohazards.usgs.gov>
> https://geohazards.usgs.gov/**mailman/listinfo/anss-netops<https://geohazards.usgs.gov/mailman/listinfo/anss-netops>
>



-- 
Juan Lugo
NP4QF
Tel: (787)833-8433
Fax: (787)265-1684
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://geohazards.usgs.gov/pipermail/anss-netops/attachments/20131007/ebc71af8/attachment.html>