[ANSS-netops] pdcc and basalt/s13

[mwithers at memphis.edu]

A problem crept into the NRL in July and Mary fixed it today.  So if you
used the NRL to create a new station with a rock das between July and today,
you might want to check your dataless.

Mitch

Center for Earthquake Research and Information (CERI)
University of Memphis                Ph: 901-678-4940
Memphis, TN 38152                   Fax: 901-678-4734


On Thu, 3 Oct 2013, mwithers at memphis.edu wrote:

>
> Any unfurloughed people using a basalt connected to a shortperiod sensor?
> I have a basalt connect to an S-13 and am attempting to use the "select
> instrumentation" tool in pdcc to generate dataless.  But pdcc keeps 
> complaining
> about a sensitivity of 0.
>
> I'm using using an S-13 with 629 V/m/s, and have the basalt max counts of
> 8388608, max 20V, acausal fitler and preamp of 1.  That should yield a
> sensitivity around 263 Volts/micron/second not 0.
>
> Has anyone else run into this?
>
> Mitch
>
> Center for Earthquake Research and Information (CERI)
> University of Memphis                Ph: 901-678-4940
> Memphis, TN 38152                   Fax: 901-678-4734
>
>
> _______________________________________________
> ANSS-netops mailing list
> ANSS-netops at geohazards.usgs.gov
> https://geohazards.usgs.gov/mailman/listinfo/anss-netops
>
>