[ANSS-netops] Fwd: RockToEW v1.61 / RockToSLink v1.0

[Jason De Cristofaro]

NetOps Attendees:

Attached is the information form ISTI on the updated RockToEW and RockToSLink modules.

Jason


_________________________
Jason De Cristofaro

U.S. Geological Survey
National Strong Motion Project
525 South Wilson Ave.
Pasadena, CA  91106


Begin forwarded message:

> From: e.thomas at isti.com (Eric Thomas)
> Date: September 28, 2011 3:31:25 PM PDT
> To: Jason De Cristofaro <jdecristofaro at usgs.gov>, Jacob Crummey <jcrummey at gps.caltech.edu>, Dennis Pumphrey <dp at kmi.com>, Doug Neuhauser <doug at seismo.berkeley.edu>
> Cc: p.friberg at isti.com (Paul Friberg), k.frechette at isti.com (Kevin Frechette), s.lisowski at isti.com (Stefan Lisowski)
> Subject: RockToEW v1.61 / RockToSLink v1.0
> 
> Hi all,
>     The updated RockToEW v1.61 is now available:
> 
> http://www.isti2.com/RockToEW
> 
>     Also available is the updated RockToSLink v1.0:
> 
> http://www.isti2.com/RockToSLink
> 
>     Both of these have the 'ChannelNames' enhancement described below (and in the documentation).  Let us know if you have any trouble with the modules.
> 
> --------------------
> 
> The 'ChannelNames' parameter may be used to select which channels are delivered.  If any channel-name entries are specified then the channel information for each message must match a given entry, or the message will be discarded.  If no channel-name entries are specified then all messages will be delivered.  The specified channel-name entries are separated by commas, and may be in the following forms:
> 1. CH
> 2. CH.LOC
> 3. CH.NET.LOC
> 4. STA.CH.NET.LOC
> 5. dig1:X
> The asterisk wildcard character (*) may be used to specify "match any name", and two dashes ("--") may be used to specify a null location code.  The following are example 'ChannelNames' entries:
> "HNZ" : select any channel with channel name "HNZ"
> "HNZ.00" : select channel with channel name "HNZ" and location "00"
> "HNZ.KM.00" : channel name "HNZ", network "KM" and location "00"
> "KMI.HNZ.KM.00" : station "KMI", channel "HNZ", network "KM" and location "00"
> "dig1:3" : select third channel configured on instrument
> "KMI.HNZ.*.00" : station "KMI", channel "HNZ", any network, and location "00"
> "KMI.HNZ.KM.--" : station "KMI", channel "HNZ", network "KM" and no location
> Multiple entries may be specified, for example:
> "HNZ,HNN,HNE"
> "KMI.HNZ.KM.00,KMI.HNN.KM.00"
> "dig1:4,dig1:5"
> "HNZ,KMI.HNN.KM.00,dig1:5"
> 
> 
> --ET
> 
>    ------------------------------------------------
> Eric Thomas - e.thomas at isti.com - http://www.isti.com
>                 Tel: (978) 422-7327
>        Instrumental Software Technologies, Inc.
> Systems Integration and Software Development Specialists
>