[ANSS-netops] dc to dc converter for hughes

[Robert Wurth]

Greg

I think that the hughs units require more then 12v.  I can check next time I
am at CCM.

Bob

On Sat, Nov 6, 2010 at 8:14 AM, Greg Steiner <vlf at cablerocket.com> wrote:

> Juan, what voltages are you trying to convert 12vdc to 24 vdc. There are
> many ways to go about doing that. If i remember right, the Hughes equipment
> requires about 1.5 amps. The simplest and most efficient way to solve this
> problem is to buy a 12v to 12v isolated dc to dc converter, then connect the
> out put in series aiding with the input. if you can tell me the exact power
> requirements of your equipment, i'd be happy to suggest a converter.
> Greg Steiner
> --
>
> Greg Steiner
>
>
>
> VLF Designs
>
> 1621 Bella Vista Dr.
>
> Jackson, Mo. 63755
>
>
>
> Ph: 573-204-1286
>
> Fax:573-204-1286
>
> Ph: 573-388-2117
>
>
>
> Email: vlf at cablerocket.com
>
>
>
> _______________________________________________
> ANSS-netops mailing list
> ANSS-netops at geohazards.usgs.gov
> https://geohazards.usgs.gov/mailman/listinfo/anss-netops
>
>


-- 
Robert Wurth
AV Computer Tech
Department of Atmospheric and Earth Sciences
St Louis University
205 O'Neil Hall
3642 Lindell Blvd.
St. Louis, MO 63108, USA
Phone (314) 977-3137, 314-977-3135
 Fax (314) 977-3117
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://geohazards.usgs.gov/pipermail/anss-netops/attachments/20101106/08d1801a/attachment-0001.html>