[Shake-dev] Fwd: a note on scwfparam scheduling

[Carlo Cauzzi]

> From: Carlo Cauzzi <carlo.cauzzi at sed.ethz.ch>
> Subject: a note on scwfparam scheduling
> Date: 16 Jun 2015 16:01:28 MDT
> To: seiscomp3-l at gfz-potsdam.de
> Cc: Carlo Cauzzi <carlo.cauzzi at sed.ethz.ch>
> 
> Dear all, 
> 
> this short message is motivated by a recent discussion I was involved in.
> 
> If you are using the SC3 module scwfparam in real-time to prepare the input xml files to USGS ShakeMap,
> note that you can schedule the waveform processing based on the following scwfparam options:
> 
> (1) wfparam.acquisition.initialTimeout —> you can set this time as short as you want (just be sure to avoid inconsistencies with wfparam.totalTimeWindowLength and wfparam.magnitudeTimeWindowTable);
> (2) wfparam.acquisition.runningTimeout —> if no new data arrives within this time interval, the seedlink request is aborted so that processing can start;
> (3) wfparam.cron.delayTimes —> this option was introduced to allow processing of delayed data, e.g. from dial-up stations.
> 
> Note that (3) can be also useful if you are monitoring a very large region and want to release a first rapid ShakeMap based on recordings in the epicentral area 
> and later a series of more informative shaking scenarios using all available stations (based on the distance criteria specified in wfparam.maximumEpicentralDistance
> or wfparam.magnitudeDistanceTable).
> 
> 
> Best regards,
> Carlo.
> 
> 
> (presently on research leave at NEIC / USGS - Golden - CO, USA)
> 
> Schweizerischer Erdbebendienst
> ETH Zürich
> 
> Dr. Carlo Cauzzi
> NO FO 69.7
> Sonneggstrasse 5
> 8092 Zürich
> Schweiz
> 
> phone: +41-44-6339161
> carlo.cauzzi at sed.ethz.ch
> http://www.seismo.ethz.ch/research/groups/alrt
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://geohazards.usgs.gov/pipermail/shake-dev/attachments/20150616/12a441d1/attachment.html>