[Shake-dev] where to get shakemap DEM grid data??

吴叔坤 wsk at gddsn.org.cn
Mon Dec 31 02:52:31 UTC 2012


BTW on that ftp site link only contained a Shakemap_fedora.zip file
在 2012-12-31,上午10:33,吴叔坤 <wsk at gddsn.org.cn> 写道:

> but unfortunately it seems ftp site was off and i can not connected it
> 在 2012-12-31,上午10:17,Branden Christensen <branden.christensen at osop.com.pa> 写道:
> 
>> WSK:
>> 
>> 
>> Download the dems from:
>> 
>> ftp://ftpext.usgs.gov/pub/cr/co/golden/lin/ShakeMap%20Portable/SRTM30.tar.gz
>> 
>> Unpack the dem's to <shake_home>/dem
>> 
>> Configure "DEMDIR" in your macros (<shake_home>/include/macros) to point to "<shake_home>/dem"
>> 
>> Configure "$results" in <shake_home>/bin/topo2grd to "command ("<shake_home>/dem/dem2grd.pl $bounds $tmp $res");
>> 
>> NOTE: I think dem2grd.pl comes inside SRTM30.tar.gz.
>> 
>> Then add:
>> my $home = "<shake_home>/dem";
>> my $gmt = "<location_gmt>/bin/";
>> my $file = "$lon$lat.grd"; (was my $file = "DATA/$lon$lat.grd")
>> before "$strict" in <shake_home>/dem/dem2grd.pl
>> 
>> 
>> That should be it. Make sure you have gmt installed. 
>> 
>> If you are not familiar with freebsd and are a Linux-Debian person, then I recommend installing ShakeMap under Ubuntu. 
>> 
>> 
>> 
>> 
>> Kind Regards from Panama, 
>> 
>> Branden C. Christensen
>> Director, OSOP
>> branden.christensen at osop.com.pa
>> www.osop.com.pa
>> Volcan, Panama
>> 
>> Reverse the order: "People do not buy what you do. They buy why you do it." - Simon Sinek, TED talk: 'How great leaders inspire action.'  
>> 
>> 
>> 
>> On Mon, Dec 31, 2012 at 1:54 AM, wsk <wsk at gddsn.org.cn> wrote:
>> hi list
>> 
>> I've successed build shakmap v3.5 on freebsd 9.1 with Mr Worden's user
>> guide and with appreciated.
>> and no i have a problem while i test it:
>> so, where to get the DEM grid data and how to use it?
>> BTW
>> and i googled SRTM30 and found on
>> http://dds.cr.usgs.gov/srtm/version2_1/SRTM30/
>> but it's a zip file without dem2grid file and have no ideas how to use it.
>> 
>> shakemap# /usr/local/shakemap/bin/shake -event 9583161
>> 2012-01-08 07:15:14 : transfer: ----- Starting Transfer at 01/08/2012
>> 07:15:14 -----
>> 2012-01-08 07:15:14 : transfer: ----- Transfer finished at 01/08/2012
>> 07:15:14 -----
>> 2012-01-08 07:15:14 : grind: WARNING: You have specified an incorrect
>> ampfactor_file in
>> 2012-01-08 07:15:14 : grind: WARNING: grind.conf.
>> 2012-01-08 07:15:14 : grind: WARNING: Continuing using default
>> Borcherdt94.dat table.
>> Quitting topo2grd. at /usr/local/shakemap/bin/../bin/topo2grd line 233.
>> /usr/local/shakemap/bin/../bin/topo2grd 9583161
>> -120.150000/-117.650000/33.813000/35.313000 0.025/0.025 regime=active
>> Using . Final resolution fixed at 0.025.
>> c
>> DEM grid file: /DATA/w180n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w180s10.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w140n90.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w140n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w140s10.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w100n90.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w100n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w100s10.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w060n90.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w060n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w060s10.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w020n90.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w020n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/w020s10.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e020n90.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e020n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e020s10.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e060n90.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e060n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e060s10.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e100n90.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e100n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e100s10.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e140n90.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e140n40.grd NOT FOUND. Why?
>> DEM grid file: /DATA/e140s10.grd NOT FOUND. Why?
>> Error in topo2grd: Nothing extracted.
>> Set $VERBOSE = 1 and examine the output.
>> It is likely you have something misconfigured in your DEM data.
>> grind: Error: Error in topo/sitecorr map creation, exiting.
>> shake: Error in grind: 256
>> 
>> _______________________________________________
>> Shake-dev mailing list
>> Shake-dev at geohazards.usgs.gov
>> https://geohazards.usgs.gov/mailman/listinfo/shake-dev
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://geohazards.usgs.gov/pipermail/shake-dev/attachments/20121231/1f088df6/attachment-0001.html>


More information about the Shake-dev mailing list