[Shake-dev] Re: shakemap error

[zehra cagnan]

Hi Bruce,
I checked the macros and ShakeConfig.pm files. Architecture is set to CISC.

mmi.grd,pga.grd,pgv.grd they are each around 60 KB. On the other hand I have
approximately 10000 rows in the grid.xml file .
zehra



On 2/15/07, Bruce Worden <cbworden at usgs.gov> wrote:
>
> Hi Zehra,
>
> On your second question -- there are some issues in getting to the lists
> from outside the gps domain.  We are going to move shake-dev to a USGS site
> fairly soon, so you should have easier access (as well as searchable
> archives).  Have you tried this URL:
>
>
> http://scsnmail.gps.caltech.edu/mailman/listinfo/shake-dev
>
>
> I don't know if that will work better for you.  I am inside the domain, so
> I see it all just fine.
>
>
> On your primary problem, your first error is:
>
>
> GMT Fatal Error: Error seeking past header file
> /home/ozden/Desktop/SHAKEMAP/shake_home/bin/../data/9583161/output/mmi.grd!
>
>
> Which tells me that the .grd files are probably not being created
> properly.  Have a look at that file and see how big it is.  You can also use
> 'grdinfo' to examine the contents -- but remember to append '=1' to the
> filename so grdinfo can read it (i.e., 'grdinfo mmi.grd=1').  If it gags,
> 'grind' isn't writing the file correctly.  If nx * ny * 4 isn't within a
> couple of dozen bytes of the file size, there is some other problem.
>
>
> Check your 'include/macros' file -- your 'ARCHITECTURE' macro should be
> set to 'CISC'.  If it isn't, you'll need to change it and run "make all" in
> the shakemap home directory again.  Then make sure that the '$architecture'
> variable in lib/ShakeConfig.pm is set to the proper thing.  If it isn't,
> delete the file and run 'make all' again.
>
>
> Bruce
>
>
>
>
>  On Feb 15, 2007, at 5:11 AM, zehra cagnan wrote:
>
> Hi Bruce
> I followed the shakemap manual and installed GMT version 3.4 thinking that
> installing GMT version 4.1 would create problems.
> Thank you very much for the help you provided. I solved the problem below.
> I uncommented certain lines within mapping as they were applicable to verion
> 4.1 of GMT.
>
> The grind module seems to work with no problems but I am still
> experiencing problems with the mapping module. I am getting the error
> message below. Somehow mapping does not create the tmpmmi.grd file. I am
> seeing the mmi.grd file under the data/mapping directory but tmpmmi.grdfile is not being created.
>
> Some of the files I need to complete regional configuration is not ready
> yet so I am using california data and trying to do a test run just to
> understand the program better.
> I commented out certain parts within shake.conf so that only
> grind,tag,mapping,genex modules will be called in the order I wrote above.
>
> My second question is regarding the shakemap list. I am trying to access
> the website of the list thinking that I might be able access the list
> archieves via there (may be some of the questions I am asking now were
> answered there before). I am using my email address as my user id and the
> password you sent me as my password but could not access the web site. is my
> user id something different than zcagnan at gmail.com
>
> thanks
> zehra
>
>
>
> grind: Type: pga; bias 0.815; absolute deviation was 0.019171 is 0.017089
> grind: Type: pgv; bias 0.775; absolute deviation was 0.006004 is 0.005444
> grind: 1 stations flagged out this iteration
> grind: Type: pga; bias 0.815; absolute deviation was 0.019171 is 0.017089
> grind: Type: pgv; bias 0.775; absolute deviation was 0.006004 is 0.005444
> grind: 0 stations flagged out this iteration
> GMT Fatal Error: Error seeking past header file
> /home/ozden/Desktop/SHAKEMAP/shake_home/bin/../data/9583161/output/mmi.grd!
> grdview: No such file or directory
> [/home/ozden/Desktop/SHAKEMAP/shake_home/bin/../data/9583161/mapping/tmp_mmi.grd]
>
> mapping: Error running command:
> /home/ozden/Desktop/SHAKEMAP/Kurulum/GMT/bin/grdview
> /home/ozden/Desktop/SHAKEMAP/shake_home/bin/../data/9583161/mapping/topo.grd
> -P -R-120.15/-117.65/33.729666/35.396333/10/3000 -JM6.5 -JZ1
> -G/home/ozden/Desktop/SHAKEMAP/shake_home/bin/../data/9583161/mapping/tmp_mmi.grd
> -C/home/ozden/Desktop/SHAKEMAP/shake_home/bin/../lib/mapping/Ii.cpt
> -I/home/ozden/Desktop/SHAKEMAP/shake_home/bin/../data/9583161/mapping/inten.grd
> -Qi72 -O -K|
>
> shake: Error in mapping: 256
>
>
>
>
>
> On 2/14/07, Bruce Worden <cbworden at usgs.gov> wrote:
> >
> > Hi Zehra,
> >
> > What version of GMT are you using?  There are problems with this
> > version of ShakeMap and certain versions of GMT.  The next version of
> > ShakeMap (V3.2, which you can get a pre-release version of at the FTP
> > site) should be more forgiving of GMT's idiosyncrasies.
> >
> > But in the version you have:
> > Edit 'mapping' and search for the string "PLOT_DEGREE_FORMAT".  There
> > is some commentary there about fixing the first error, below.
> >
> > The topography error is odd -- can you verify that you have the
> > topography files "cal_neva_9c[i].grd" (or whatever topo files you
> > have configured in mapping.conf) and not just links?  If they are
> > links, you can get the actual files at the FTP site.
> >
> > Also, I am adding you to the shake-dev mailing list (you should get a
> > confirmation email shortly -- make sure your spam filter doesn't get
> > it) so you can ask your questions there, and maybe get more help.
> >
> > I hope this helps.
> >
> > Bruce
> >
> > On Feb 14, 2007, at 2:59 AM, zehra cagnan wrote:
> >
> > > Okey
> > > I solved the previous problem. The binary form of the vsgrid.txt
> > > that we were using was not generated on a linux machine. That was
> > > the problem.
> > > Now I am having problems with the GMT.
> > >
> > > The error message that i am getting is below. Any help you can
> > > provide?
> > >
> > > grind: Type: pga; bias 0.815; absolute deviation was 0.019171 is
> > > 0.017089
> > > grind: Type: pgv; bias 0.775; absolute deviation was 0.006004 is
> > > 0.005444
> > > grind: 1 stations flagged out this iteration
> > > grind: Type: pga; bias 0.815; absolute deviation was 0.019171 is
> > > 0.017089
> > > grind: Type: pgv; bias 0.775; absolute deviation was 0.006004 is
> > > 0.005444
> > > grind: 0 stations flagged out this iteration
> > > gmtset: GMT SYNTAX ERROR in GMT_setparameter:  Unrecognized keyword
> > > PLOT_DEGREE_FORMAT
> > > gmtset: GMT SYNTAX ERROR:  PLOT_DEGREE_FORMAT given illegal value (D)!
> > > gmtset:  1 conversion errors
> > > mapping: WARNING: no topography data found; will continue without
> > > topo.
> > > GMT Fatal Error: Error seeking past header file /home/ozden/Desktop/
> > > SHAKEMAP/shake_home/bin/../data/9583161/output/mmi.grd!
> > > mapping: WARNING: can't find topo data: making mmi without topography
> > > grdimage: No such file or directory [/home/ozden/Desktop/SHAKEMAP/
> > > shake_home/bin/../data/9583161/mapping/tmp_mmi.grd]
> > > mapping: Error running command:
> > > /home/ozden/Desktop/SHAKEMAP/Kurulum/GMT/bin/grdimage /home/ozden/
> > > Desktop/SHAKEMAP/shake_home/bin/../data/9583161/mapping/tmp_mmi.grd
> > > -P -R-120.15/-117.65/33.729666/35.396333/10/3000 - JM6.5 -C/home/
> > > ozden/Desktop/SHAKEMAP/shake_home/bin/../lib/mapping/Ii.cpt -O -K|
> > >
> > >
> >
> >
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://geohazards.usgs.gov/pipermail/shake-dev/attachments/20070216/d3a2934e/attachment-0002.html