# VERSION: 1.33	DO NOT REMOVE OR CHANGE THIS LINE
###########################################################################
# organization
# Specify the name of the map-producing organization for inclusion in
# map titles; don't get carried away here, there isn't much room; statement
# format is:
#
#	organization : Name of Organization
#
# Example:
#
#	organization : USGS
#
###########################################################################
organization : PNSN 

###########################################################################
# mmi_?res specify the spatial resolution of the mmi grid; these values
# MUST be set to the same resolution as the standard topography;
# mmi_?hires specify the spatial resolution of the mmi grid when the
# "-hires" option is used; the values MUST be set to the same resolution
# as the high-resolution topography (if high-resolution topography is used).
# The hires values are only important if mapping is run with -hires.
# The statement format is:
#
# mmi_xres   : <floating point value><units>
# mmi_yres   : <floating point value><units>
# mmi_xhires : <floating point value><units>
# mmi_yhires : <floating point value><units>
#
# Where <units> is one of:
#	' ' => degrees (i.e. no units specified)
#	'm' => minutes
#	'c' => seconds
#
# e.g.:
#	mmi_xres   : 0.5m
#	mmi_yres   : 0.5m
#	mmi_xhires : 0.05m
#	mmi_yhires : 0.05m
#
# The default value is '30c' for low-resolution and 3c for high-resolution.
###########################################################################
# WTG - 17 Apr 06 - updated from Magro
#mmi_xres	: 9c
#mmi_yres	: 9c
#mmi_xres        : 31.0c
#mmi_yres        : 31.0c
#mmi_xhires	: 3c
#mmi_yhires	: 3c
mmi_xres        : 7.2c
mmi_yres        : 7.2c
mmi_xhires	: 7.2c
mmi_yhires	: 7.2c

###########################################################################
# network_color specifies the fill color of the stations plotted on the
# maps based on the source network.  The color codes are defined in
# colors.conf.  The default is yellow.  Statement format:
#
#	network_color : <network_code> <color code> [<symbol> [<size>]]
#
# The network code is the official two-character network code 
# assigned to the source network and is given by the "netid" attribute
# of the "station" tag in the input XML. The symbol is the symbol code
# given to the GMT program 'psxy' via the -S option.  See the psxy man
# page for information on the allowable symbols (but common ones are:
# a = star, c = circle, d = diamond, s = square, t = triangle, x = cross).
# The default symbol is 't' (triangle).  Size is the size of the symbol as 
# defined by psxy. The default size is given by the station_size parameter 
# elsewhere in this file, and defaults to 0.12.
#
# Example:
#
#	network_color : CE blue t 0.12
#
# This parameter is intended to replace "station_color" (see below), 
# however both are still used to facilitate the transition.  
# network_color is used preferentially over station_color
# Known networks:
#	CI	SCSN
#	CE	CGS/CSMIP
#	AZ	ANZA
#	NP	NSMP
#	NC	NCSN
#	BK	Berkeley
#	NN	Nevada
#	XP	Tremor
#	PG	PG&E
#	HI	Historic
#	UK	Unknown
#	US	US National Network
###########################################################################
#network_color   : CI red t 0.12
#network_color   : CE blue t 0.12
#network_color   : AZ yellow t 0.12
#network_color   : NP green t 0.12
#network_color	: NC orange t 0.12
#network_color	: BK turquoise t 0.12
#network_color   : NN darkblue t 0.12
#network_color   : XP darkgreen t 0.12
#network_color   : PG magenta t 0.12
#network_color   : HI yellowgreen t 0.12
network_color   : UK grey t 0.12
network_color   : US darkred t 0.12
network_color   : UW red t 0.12
network_color   : NP blue t 0.12

###########################################################################
# station_color specifies the fill color of the stations plotted on the
# maps based on the source network. The color codes are defined in 
# colors.conf. The default is yellow.  Statement format:
#
#	station_color : <color code> <network>
#
# where <network> specifies the data source from the stationlist.dtd, and
# <color code> specifies the color code from colors.conf.  The network
# should be the exact string found in the 'source' attribute of the input
# XML file (e.g. "SCSN and Trinet" or "ANZA Regional Network").
#
# NOTE: This parameter is now deprecated.  network_color should be used
# instead.
# station_color   : red SCSN and TriNet
# station_color   : red SCSN
# station_color   : blue CDMG
# station_color   : blue CGS
# station_color   : blue California Strong Motion Instrumentation Program
# station_color   : yellow ANZA Regional Network
# station_color   : green NSMP
# station_color   : green United States National Strong-Motion Instrumentation Network
# station_color   : green United States National Strong-Motion Network
# station_color   : green HIST
###########################################################################
station_color   : red PNSN
station_color   : blue NSMP
station_color   : cyan USNSN
station_color   : orange OTHER



###########################################################################
# station_symbol -- specifies the symbol used to identify seismic stations
# on the maps if they are not specified by network_color statements; See
# the manual page for the GMT command 'psxy' for allowable values; the
# default is 't' (for triangle).
#
# station_size -- specifies the size of the station symbols on the maps, 
# in inches, if they are not specified by network_color statements; the 
# default is 0.12.
#
# Statement format:
#
#	station_symbol : <symbol_character>
#	station_size   : <size in inches>
#
###########################################################################
station_symbol 	: t
station_size 	: 0.10
#station_size 	: 0.12

###########################################################################
# estimate_symbol -- specifies the symbol used to identify the "phantom"
# stations (i.e., the estimated ground motion control points); see
# the manual page for the GMT command 'psxy' for allowable values; the
# default is 'c' (for circle).
#
# estimate_size -- specifies the size of the symbols used to identify
# the "phantom" stations, in inches; the default is 0.06.
#
# Statement format:
#
#	estimate_symbol : <symbol_character>
#	estimate_size   : <size in inches>
#
###########################################################################
estimate_symbol	: c
estimate_size	: 0.06

###########################################################################
# contour_color specifies the color of the PGA/PGV contours on the maps;
#   the default is yellow
# ncontours is the approximate number of contours on the contour plots
# contour_width specifies the width of the PGA/PGV contours (default 8)
# highway_color specifies the color of the highways (default darkgrey)
# highway_width specifies the width of the highways (default 8)
# fault_color specifies the color of the faults (default darkred)
# fault_width specifies the width of the faults (default 8)
# border_width specifies the width of the state/national/coastal 
#   borders (default 8)
# water_color specifies the color of the wet areas (default lightblue)
# epicenter_color specifies the fill color of the star (black outline)
#   that marks the epicenter (default is for an unfilled star)
# epicenter_size determines the size of the star that represents the
#   earthquake epicenter, in inches
# main_title_size is the font size of the main title at the top of the plots
# sub_title_size is the font size of the subtitle at the top of the plots
# city_dot_size specifies the size, in inches, of the dot marking the
#   locations of cities
# city_name_size: point size of the font used to label cities (this
#   parameter is overridden if the *_label versions of the city files
#   are used (see elsewhere in this config for an explanation of the _label
#   versions of the city name files)
# tv_* are the equivalent of the non-tv parameters above, but are used
#   to configure the TV map
#
#       contour_color     : <color code>
#	ncontours	  : <number of contours>
#	contour_width     : <line width>
#	highway_color     : <color code>
#	highway_width     : <line width>
#	fault_color       : <color code>
#	fault_width       : <line width>
#	border_width      : <line width>
#	water_color       : <color code>
#	epicenter_color   : <color code>
#	epicenter_size    : <symbol size in inches>
#	main_title_size   : <font point size>
#	sub_title_size    : <font point size>
#	city_dot_size	  : <symbol size in inches>
#	city_name_size    : <font point size>
#	tv_highway_width  : <line width>
#	tv_highway_color  : <color code>
#	tv_border_width   : <line width>
#	tv_city_dot_size  : <symbol size in inches>
#
# where <color code> specifies a color code defined in colors.conf.
###########################################################################
# WTG - 17 Apr 06 - Mods from Magro
#contour_color	  : white
contour_color     : yellow
ncontours	  : 8
#contour_width	  : 5
contour_width     : 8
#highway_color	  : lightgrey
#highway_width	  : 6
highway_color     : darkgrey
highway_width     : 4
fault_color	  : darkred
fault_width	  : 4
#border_width	  : 5
border_width	  : 2
water_color	  : lightblue
#epicenter_size	  : 0.30
epicenter_size	  : 0.12
main_title_size   : 15
sub_title_size    : 12
city_dot_size	  : 0.08
city_name_size    : 9
tv_highway_width  : 8
tv_highway_color  : lightgrey
tv_border_width   : 10
tv_city_dot_size  : 0.08

###########################################################################
# ff_width/ff_color specify the width and color of the finite fault (when
# one is supplied in the input directory.  ff_width is given in points,
# ff_color is one of the colors given in color.conf.  The defaults are:
# ff_width (12), ff_color (darkgrey).
#
# Example:
#
#	ff_width : 9
#	ff_color : black
#
###########################################################################
ff_width : 12
ff_color : darkgrey

###########################################################################
# xorig/yorig specify the position (in inches) of the lower left corner
# of the maps, effectively specifying the left and bottom margins of the
# plots.
# Statement format:
#
#	xorig : <position>
#	yorig : <position>
#
# Where <position> is given in inches; the default is 1.0 inches for both
# xorig and yorig
###########################################################################
xorig		: 1.0
yorig		: 1.0

###########################################################################
# width specifies the width (in inches) of the maps.
# tvwidth specifies the width (in inches) of the tvmaps.
# Statement format:
#
#	width   : <width>
#	tvwidth : <width>
#
# Where <width> is given in inches; the default is 6.5 inches for the
# normal maps, 10.0 inches for the tvmaps.
# Note: the height of the map will be determined by the width, lonspan, 
# latspan and the projection used; the value for any given map can be
# found in the <shake_home>/data/<event_id>/mapping directory in the
# file "geometry_map.txt"
###########################################################################
width		: 6.5
tvwidth		: 10.0

###########################################################################
# map_axes specifies the format for the plotting and annotation of the
# the axes on the maps.
# Statement format:
#
#	map_axes : <string>
#
# Where <string> is the string to be given as the argument to the -B
# flag of the GMT psbasemap command; the default is 'a60mf30mWSen'.
###########################################################################
#map_axes	: a60mf30m/a30mf30mWSen
map_axes	: a15mf15m/a15mf15mWSen

###########################################################################
# map_data_dir: A directory in which one may store various map files; this
# entry is only used to substitute for the "<MAP_DIR>" string in config
# statements below; the string "<SHAKE_HOME>" in the value portion of this
# statement will be replaced with the path of the ShakeMap installation;
# this statement is not required and will default to <shake_home/lib/mapping
# the statement has the form:
#
#	map_data_dir : <path>
#
###########################################################################
map_data_dir	: <SHAKE_HOME>/lib/mapping

###########################################################################
# topo_cmap, ii_cmap, ii_tvmap_cmap: GMT colormaps used for topography,
# the instrumental intensity map, and the TV version of the instrumental 
# intensity map, respectively; these entries are required, though they 
# could be empty files if you do not plot topography or II or the TV map, 
# respectively; the statements have the form:
#
#	topo_cmap     : <path>
#	ii_cmap       : <path>
#	ii_tvmap_cmap : <path>
#
# sd_cmap is the GMT colormap used for the uncertainty (standard
# deviation) maps.  It uses the same form as the other statements:
#
#	sd_cmap	      : <path>
#
# If path contains the string "<MAP_DIR>", it will be replaced with the
# path given by map_data_dir (see above)
###########################################################################
topo_cmap	: <MAP_DIR>/tan.cpt
ii_cmap  	: <MAP_DIR>/Ii.cpt
ii_tvmap_cmap  	: <MAP_DIR>/Ii_ntsc.cpt
sd_cmap         : <MAP_DIR>/sd.cpt

###########################################################################
# Map statements; if omitted, the corresponding feature will not be plotted;
# see the mapping program for file format documentation and the southern 
# California files supplied with the distribution for examples of these
# files; the statements are:
#
#	map_roads           : <path>
#	map_faults          : <path>
#	map_cities          : <path>
#	map_cities_label    : <path>
#	map_topo            : <path>
#	map_topo_hires      : <path>
#	map_intensity       : <path>
#	map_intensity_hires : <path>
#
# map_topo is the normal GMT (.grd) topography file; 
# map_topo_hires is the high-resolution topography used by the -hires 
#  option -- specifying the high-resolution topography files is not 
#  necessary unless mapping is run with -hires.  Many regions use the
#  resolution topography by default and therefore do not need to specify
#  this parameter; 
# map_intensity is an optional file that contains the pre-computed 
#  topographic intensity from the map_topo file; if map_intensity is 
#  omitted or does not exist, the intensity will be computed using 
#  grdgradient with the options -A325 -Nt; if the file is specified but 
#  does not exist, it will be written to the specified location, otherwise 
#  it will be "<MAP_DIR>/intensity.grd"; the same holds for 
#  map_intensity_hires, but if unspecified it will be written to 
#  "<MAP_DIR>/intensity_hires.grd"; if this is going to happen,
#  make sure that the user running mapping has permission to write in 
#  these directories.
#
# map_cities consists of three space-separated columns: lon, lat, and 
#  city name (multiple word names are supported).  If the city name is 
#  followed with a '#', the city is not plotted on the map.  If map_cities
#  is used, the city name will be centered above the dot representing
#  the city.  The bottom of the city name text will be 0.02 degrees
#  above the dot.
#
# map_cities_label allows for greater control of the placement and style
#  of the city name as it appears on the plot.  If map_cities_label is 
#  defined, it will be used in preference to map_cities.  The file specified 
#  by map_cities_label has nine columns:
#	latitude		: the latitude of the city
#	label_lat_offset	: the latitude offset of the label from
#				  the city location (relative to "justify")
#	longitude		: the longitude of the city
#	label_lon_offset	: the longitude offset of the label from
#				  the city location (relative to "justify")
#	font_size		: the text font size as defined by pstext
#	angle			: the text angle as defined by pstext
#	font			: the text font as defined by pstext
#	justify			: the text justification as defined by pstext
#	city_name		: the name of the city
#  As with map_cities, if the city name is followed by a '#' the city
#  will be omitted.  See the GMT documentation for 'pstext' for an
#  explanation of the various fields.  The _label form of map_cities
#  is now perferred.
#
# If path contains the string "<MAP_DIR>", it will be replaced with the
# path given by map_data_dir (see above)
###########################################################################
# WTG 17 Apr 06 - change from Magro
map_roads       : <MAP_DIR>/pnw_hiway_big.txt
map_faults      : <MAP_DIR>/pnw_faults.txt
map_cities      : <MAP_DIR>/pnw_cities.txt
map_topo  	: <MAP_DIR>/pnw_30.grd
#map_roads	    : <MAP_DIR>/ca_roads.xy
#map_faults          : <MAP_DIR>/ca_faults.xy
#map_cities	    : dummy
#map_cities_label    : <MAP_DIR>/us_cities.txt
#map_topo  	    : <MAP_DIR>/cal_neva_9c.grd
#map_intensity  	    : <MAP_DIR>/cal_neva_9ci.grd
#map_topo_hires      : <MAP_DIR>/cal_neva_9c.grd
#map_intensity_hires : <MAP_DIR>/cal_neva_9ci.grd

###########################################################################
# big_cities: a list of large cities suitable for the TV map
# very_big_cities: a list of very large cities suitable for the TV map
#                  at large scales
#
# big_cities_label and very_big_cities_label are also supported.  See
# the discussion of map_cities_label, above, for the file format.
# As with big_cities_label, the _label versions of these parameters
# are now preferred.
###########################################################################
# WTG 17 Apr 06 - change from Magro
big_cities              : <MAP_DIR>/pnw_bigcities.txt
#big_cities_label        : <MAP_DIR>/bigcities_label.txt
very_big_cities         : <MAP_DIR>/pnw_bigcities.txt
#
#big_cities		: dummy
#big_cities_label	: <MAP_DIR>/ca_bigcities_label.txt
#very_big_cities		: dummy
#very_big_cities_label	: <MAP_DIR>/ca_verybigcities_label.txt

###########################################################################
# use_gmt_coast: determines whether or not the gmt command 'pscoast' is
# used to draw the coastline and fill in the areas covered by water;
# valid values are 'true' or 'false'; the default is 'true';
#
# Example:
#
#	use_gmt_coast : false
#
###########################################################################
# WTG 17 Apr 06 - change from Magro
use_gmt_coast : true

###########################################################################
# These parameters allow some customization of the intensity plot:
#  faults_on_mmi determines whether or not the mapped fault traces will
#    be plotted (the default is 'false')
#  stations_on_mmi determines whether or not open triangles are plotted
#    at the locations of the seismic stations (the default is 'true')
#  filled_stations_on_mmi determines whether or not filled triangles are 
#    plotted at the locations of the seismic stations (the default is 'false')
#
#	faults_on_mmi          : <true | false>
#	stations_on_mmi        : <true | false>
#	filled_stations_on_mmi : <true | false>
###########################################################################
# WTG 17 Apr 06 - change from Magro
#faults_on_mmi		: true
faults_on_mmi		: false
stations_on_mmi		: true
filled_stations_on_mmi 	: true

###########################################################################
# psxy_addon: allows for customized overlays by providing the user with
# access to the GMT psxy command.  Multiple psxy_addon lines are supported,
# and run in the order they appear.  psxy is run with the generic options
# needed by ShakeMap (setting the map boundaries, -O -K, etc.).  The 
# arguments to this option consist of a file name (the file is expected to
# reside in the "map_data_dir", see above), followed by any special flags
# that the user finds appropriate for psxy.  The file is expected to be
# in a format that psxy will understand.  The layers are added on top of
# the pscoast layer.  The default is to do nothing.
#
# For example the California ShakeMap groups set 'use_gmt_coast'
# to false, and use these lines to draw their water boundaries:
#
#	psxy_addon : line_cal_coast.xy -M -G120/160/220
#	psxy_addon : line_cal_ow_streams.xy -M -W1/100/140/200
#	psxy_addon : line_cal_lakes.xy -M -G120/160/220 -W1/100/140/200
#	psxy_addon : line_cal_drylakes.xy -M -W2/100/140/200
#	psxy_addon : line_cal_islands.xy -M -W1/140/180/240
#	psxy_addon : line_usa_west_borders.xy -M -W4/0/0/100
#
###########################################################################
# WTG 17 Apr 06 - change from Magro
#psxy_addon : line_cal_coast.xy -M -G120/160/220
#psxy_addon : line_cal_ow_streams.xy -M -W1/100/140/200
#psxy_addon : line_cal_lakes.xy -M -G120/160/220 -W1/100/140/200
#psxy_addon : line_cal_drylakes.xy -M -W2/100/140/200
#psxy_addon : line_cal_islands.xy -M -W1/140/180/240
#psxy_addon : line_cal_borders.xy -M -W4/0/0/100

###########################################################################
# pstext_addon: allows for customized overlays by providing the user with
# access to the GMT pstext command.  Multiple pstext_addon lines are supported,
# and run in the order they appear.  pstext is run with the generic options
# needed by ShakeMap (setting the map boundaries, -O -K, etc.).  The 
# arguments to this option consist of a file name (the file is expected to
# reside in the "map_data_dir", see above), followed by any special flags
# that the user finds appropriate for pstext.  The file is expected to be
# in a format that pstext will understand.  The layers are added on top of
# the layer that prints city names.  The default is to do nothing.
#
# Example:
#
#	pstext_addon : fault_names.txt
#
###########################################################################
# WTG 17 Apr 06 - change from Magro
#psxy_addon: north_ps_wat.txt -M -W2 -G120/160/220
#psxy_addon: north_ps_wat.txt -M -W3
#psxy_addon: south_ps_wat.txt -M -G120/160/220
#psxy_addon: south_ps_wat.txt -M -W3
#psxy_addon: ps_land.txt -M -G100/200/100
#psxy_addon: ps_land.txt -M -W2
# Fault trace for Seattle Fault Scenerio
# psxy_addon:


###########################################################################
# noscenariosplash: option to turn off 'Scenario' sign on scenario maps
###########################################################################
noscenariosplash: false
