<div dir="ltr"><div>Hello,</div><div><br></div><div>As previously announced, we are replacing the existing Realtime PDL hubs.  The DNS change has been completed and old server names are now canonical names to the new servers.  Consumers (receive) should note that because of this change that ONLY the New Realtime PDL hubs are guaranteed to have all information.  The Old Realtime PDL hubs will be shut down on March 1, 2017.</div><div><br></div><div><br></div><div>Old Realtime PDL hubs:</div><div><a href="http://ehppdl1.cr.usgs.gov">ehppdl1.cr.usgs.gov</a> ( CNAME to <a href="http://prod01-pdl01.cr.usgs.gov">prod01-pdl01.cr.usgs.gov</a> )</div><div><a href="http://ehppdl2.wr.usgs.gov">ehppdl2.wr.usgs.gov</a> ( CNAME to <a href="http://prod02-pdl01.cr.usgs.gov">prod02-pdl01.cr.usgs.gov</a> )</div><div><br></div><div>New Realtime PDL hubs:</div><div><a href="http://prod01-pdl01.cr.usgs.gov">prod01-pdl01.cr.usgs.gov</a> ( 137.227.224.211 )</div><div><a href="http://prod02-pdl01.cr.usgs.gov">prod02-pdl01.cr.usgs.gov</a> ( 137.227.252.137 )</div><div><br></div><div><br></div><div>PRODUCER/SEND CONFIGURATION CHANGES</div><div><br></div><div>Producers (send) may now begin updating their configurations.  While the CNAME DNS change should automatically route your traffic to the new servers, you may want to update your configuration to avoid future confusion.</div><div><br></div><div><br></div><div>1) Update server references in your INI file (config.ini)</div><div><br></div><div>You can check which sender sections are active by looking at the "senders" property (before any sections) in your configuration.  Most consumers have a "sender_ehppdl1" and "sender_ehppdl2" section in their configuration, for example</div><div>    senders = sender_ehppdl1</div><div><br></div><div>In any sender sections (type = gov.usgs.earthquake.distribution.SocketProductSender),</div><div>update the "host" property to reference the New Realtime PDL hubs:</div><div><br></div><div>    Replace "<a href="http://ehppdl1.cr.usgs.gov">ehppdl1.cr.usgs.gov</a>" with "<a href="http://prod01-pdl01.cr.usgs.gov">prod01-pdl01.cr.usgs.gov</a>"</div><div>    Replace "<a href="http://ehppdl2.wr.usgs.gov">ehppdl2.wr.usgs.gov</a>" with "<a href="http://prod02-pdl01.cr.usgs.gov">prod02-pdl01.cr.usgs.gov</a>"</div><div><br></div><div>For Example:</div><div><br></div><div>[sender_ehppdl1]</div><div>type = gov.usgs.earthquake.distribution.SocketProductSender</div><div>host = <a href="http://prod01-pdl01.cr.usgs.gov">prod01-pdl01.cr.usgs.gov</a></div><div>port = 11235</div><div><br></div><div><br></div><div>2) Restart your PDL client using the init script.</div><div><br></div><div>For example:</div><div>ProductClient/init.sh restart</div><div><br></div><div><br></div><div>Thanks,</div><div><br></div><div>Jeremy</div><div><br></div></div>