[ANSS-netops] station goes non-responsive
Stickney, Mike
MStickney at mtech.edu
Mon Jan 26 19:02:18 GMT 2009
Hi All:
We have a seismic station in NW Montana that consists of a
K2 data logger with 3 components of strong motion and a short period
vertical seismometer, all telemetered via FreeWave DGR115R radios to a
PC running Earthworm. It is a good station at runs fine until it goes
dead every few months or so. When it goes comatose, I can't seem connect
to the K2 using hyperterminal. During a site visit, powering down the
system and installing a new CF memory card fixes the problem.
Does anybody have similar occurrences or suggestions on how
to diagnose the problem short of a site visit?
Thanks for any feedback. -Mike
Michael Stickney, Director
Earthquake Studies Office
Montana Bureau of Mines and Geology
Montana Tech of the University of Montana
1300 W Park St
Butte, MT 59701
Voice: (406) 496-4332
Fax: (406) 496-4451
Email: mstickney at mtech.edu
Web: http://mbmgquake.mtech.edu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://geohazards.usgs.gov/pipermail/anss-netops/attachments/20090126/bf9ef08e/attachment.html
More information about the ANSS-netops
mailing list